Diluter & dispenser
The Compudil 3 is the ultimate diluter/dispenser for virtually all liquid handling procedures. It features dual syringes, on-board programming and a 45 program memory
Simple keypad programming
2-way program exchange with PC
45 program memory
Volumes from 1µl – 25ml
4 dilution modes
6 transfer and wash modes
Serial dilution mode
A 48 character display prompts the user and provides program information. From the keypad 4 types of dilution, 6 types of dispensing, liquid transfer and wash and serial dilution can be accessed.
Further versatility is provided by the RS232 socket which allows two way program exchange with a PC for GLP accreditation requirements. 15 further memories are provided for the storage of PC generated programs.
|Accuracy and Resolution:||Full stroke of all syringes in 5000 steps.
Where necessary, selected volumes are rounded down. Actual delivered volume: +/-1% of syringe volume
|Speeds:||Approx. 2-15 seconds for full stroke of syringe.|
|Precision:||CV: Better than 0.1%.|
|Dead Volume:||Approx. 1ml, of which 95% is recoverable using the PRIME function (standard 30cm length 1.6mm I.D. reagent inlet tube, 1ml and 50ml syringes). Increased risk of detectable carry-over with dilution ratios less than 1:5, or with immiscible liquids.|
|Chemical Resistance:||All valves, syringes and tubing are manufactured from glass or PTFE-based materials for total chemical resistance (except HF and HF compounds).|
|Controls:||Rear panel: POWER on/off switch, socket for handset or footswitch control.
RS232 socket for computer control.
Front panel: 48 character display and 14 button tactile keypad.
|Dimensions:||300mm(W) x 200mm(D) x 215mm(H).|
|Weight:||7.5kg, (packed for shipment: 9.5kg).|
|HTZ Part # 9558/001||Compudil 3 complete with one valve block, tubing and handset