Name: EVT2 Transport Logger
SKU: EVT2
Description:
EVt2 Transport Temperature Logger for multi journey use

Compact and easy to use, the EVt2 logger provides the most cost effective transport logging solution over any distance, from local to international deliveries. Use it too, in applications where simple, low cost temperature monitoring is needed.

EVt2 loggers are electronic, programmable and log data for permanent storage on a PC. Requires dedicated software and a computer interface to download data to a PC – see accessories.

Two versions of software are available, EVSW for general use and ideal for HACCP and other quality systems, EVSWPRO which aids compliance with 21CFR Part 11.

Tested to meet EN12830:1999.

  • Compact logger, ideal for multiple trips or where a separate log is required for outward and return deliveries – just download to a PC after each trip and re-use
  • Pre-programmed logging sequence ready for instant use
  • Internal sensor
  • Memory capacity up to 3000 readings
  • Critical data shown on display
  • Case certified waterproof to IP67 standards
  • Up to 2 year battery life
  • BioCote® antimicrobial protection

Detail:

Sensor Type Thermistor
Measurement Range -30°C to +70°C, -22°F to +158°F
Scales °C, °F
Display Resolution 0.1°C
System Accuracy
-30°C to +70°C ±0.5°C
-22°F +158°F ±0.9°F
Channels Single internal sensor only
Memory 3000 samples
Communications Via infra red interface
Logging Frequency Programmable between 1 second and 99 hours
Logging start/stop/LCD Single multi-function button operation
Internal Sensor Response time T90 = 15 to 30 minutes in ambient air
Ambient storage -30°C to +70°C, -22°F to +158°F
Battery type ½ AA Lithium
Battery life 24 months
(Based on a 15 minute log rate
at +20°C/+68°F with alarms off)
Case Material Food safe polycarbonate
LED Indication Red = Alarm
Green = Logger active
Dimensions
Length 88mm (including fixing lug)
Width 80mm
Depth 35mm

EVSW Software and New USB Cradle Drivers can be downloaded using these links.