Memmert IF75 Incubator
Memmert IF75 74-litre laboratory incubator with forced air circulation and SingleDISPLAY control. Working temperature: at least 10°C above ambient up to +80°C. Review the specifications and request a configuration-specific quotation from CSI Labshop Malaysia.
Price on request
Tell us the quantity and we'll send a quotation with availability and delivery.
Malaysia-wide deliveryHelp choosing the right modelOne quote for your whole list
Product details
Memmert IF75: 74-litre forced-air incubation
The Memmert IF75 is a 74-litre laboratory incubator with forced air circulation and a SingleDISPLAY controller. Its working temperature starts at least 10°C above ambient and extends to +80°C. Check this ambient-temperature limit when matching the incubator to your method.
Choosing the right configuration
- Specify your operating temperature, room temperature, sample load and required shelf arrangement.
- Check the chamber and external dimensions in the specifications below, together with installation clearances.
- For temperatures close to or below room temperature, ask about an appropriate cooled incubator.
Compare the IF75plus listing or browse Memmert incubators before choosing your configuration.
Detailed specifications
Memmert IF75 Incubator
Temperature
| Working temperature range | min. 10°C above ambient up to +80°C |
|---|---|
| Setting accuracy temperature | 0.1 °C |
| Temperature | 1 Pt100 sensor DIN class A in 4-wire-circuit |
Control technology
| Language setting | German, English, Spanish, French, Polish, Czech, Hungarian |
|---|---|
| ControlCOCKPIT | SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display |
| Timer | Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
| Function SetpointWAIT | the process time does not start until the set temperature is reached |
| Calibration | three freely selectable temperature values |
| adjustable parameters | temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime |
Ventilation
| Fan | forced air circulation by quiet air turbine, adjustable in 10 % steps |
|---|---|
| Fresh air admixture | adjustment of pre-heated fresh air admixture by air flap control in 10 % steps |
| Vent | vent connection with restrictor flap |
Communication
| Documentation | programme stored in case of power failure |
|---|---|
| Programming | AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand). |
Safety
| Temperature control | adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature |
|---|---|
| Autodiagnostic system | for fault analysis |
Standard equipment
| Door | fully insulated stainless steel door with 2-point locking (compression door lock) |
|---|---|
| Internals | 2 stainless steel grid(s), electropolished |
| Works calibration certificate | incl. works calibration certificate for +37°C |
| Door | inner glass door |
Stainless steel interior
| Interior | easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides |
|---|---|
| Volume | 74 l |
| Dimensions | w(A) x h(B) x d(C): 400 x 560 x 330 mm |
| Max. number of internals | 6 |
| Max. loading of chamber | 120 kg |
| Max. loading per internal | 20 kg |
Textured stainless steel casing
| Dimensions | w(D) x h(E) x d(F): 585 x 944 x 514 mm |
|---|---|
| Housing | rear zinc-plated steel |
Electrical data
| Voltage Electrical load | 230 V, 50/60 Hz approx. 1250 W |
|---|---|
| Voltage Electrical load | 115 V, 50/60 Hz approx. 900 W |
Ambient conditions
| Set Up | The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm. |
|---|---|
| Altitude of installation | max. 2,000 m above sea level |
| Ambient temperature | +5 °C to +40 °C |
| Humidity rh | max. 80 %, non-condensing |
| Overvoltage category | II |
| Pollution degree | 2 |
Packing/shipping data
| Transport information | The appliances must be transported upright |
|---|---|
| Customs tariff number | 8419 8998 |
| Country of origin | Federal Republic of Germany |
| WEEE-Reg.-No. | DE 66812464 |
| Dimensions approx incl. carton | w x h x d: 730 x 1130 x 670 mm |
| Net weight | approx. 66 kg |
| Gross weight carton | approx. 85 kg |
Request a quotation in Malaysia
Contact CSI Labshop with model IF75, quantity, operating temperature, electrical supply and delivery location. Specify any shelf, calibration or accessory requirements so the quotation can identify the required configuration.
Manufacturer reference: Memmert IF75 specifications.
Need a different model?
Tell us your sample type, capacity and budget. We'll suggest suitable models from the brands we supply.
Why CSI Labshop
- Lab chemicals, consumables and instruments from one supplier
- Malaysia-wide delivery
- Help choosing the right model
