Vacuum Pumps
A laboratory vacuum pump draws air and vapour out of a system to speed up filtration, aspiration, drying, solid-phase extraction and solvent evaporation. CSI Labshop can supply vacuum pumps, traps and tubing to laboratories across Malaysia.
Tell us the application, the vacuum level and flow rate you need, and the solvents involved, and we will recommend a pump and send a quotation.
How laboratories use vacuum pumps
- Vacuum filtration pulls liquid through a filter quickly, for example in water and gravimetric tests.
- Solvent evaporation lowers the boiling point so extracts can be concentrated gently.
- Drying and degassing removes moisture and air from samples and solutions.
Vacuum pumps we supply
- Chemical-resistant diaphragm pumps. The CHEMKER 400 has PTFE wetted parts that resist most corrosive gases and vapours, needs no oil, and has thermal protection that restarts the pump after it cools. It suits vacuum filtration, gel electrophoresis, SPE and solvent purification.
- Compact oil-free pumps. The FAVORIT Oil Free Vacuum Pump 300 gives 19 L/min and a maximum vacuum of 620 mmHg, with low noise and vibration, for filtration and general laboratory use.
- VACUUBRAND chemistry pumps. Oil-free chemistry diaphragm pumps with fluoroplastic wetted parts, from 100 mbar down to 0.9 mbar, and VARIO chemistry pumping units that adjust their speed to the boiling solvent. See all VACUUBRAND vacuum pumps.
How to choose a vacuum pump
- Oil-free or oil-sealed: oil-free diaphragm pumps need no oil changes and give off no oil mist, so they suit most routine laboratory work.
- Chemicals: for solvents and acid vapours, choose PTFE wetted parts like the CHEMKER 400, and use a cold trap to protect the pump.
- Vacuum level: filtration and aspiration need only moderate vacuum; evaporation of high-boiling solvents needs a deeper vacuum.
Frequently asked questions
Which pump for a rotary or parallel evaporator?
Tell us the evaporator and the solvents, and we will match a pump. A VACUUBRAND VARIO pumping unit finds the boiling point itself, which shortens distillations. See also Evaporators & Distillation.
Which pump for vacuum filtration?
A compact oil-free pump such as the FAVORIT 300 is usually enough. For filter holders and membranes, see Filtration & Blotting.
-
VACUUBRAND Vacuum Pumps (2)
-
Favorit Oil Free Vacuum Pump 300 (1)
-
KNF LABOPORT Vacuum Pumps (1)
-
ROCKER Vacuum Pumps (1)
Not sure which model fits?
Tell us your application, sample type and budget. We’ll suggest suitable models from the brands we supply and send one quotation.
