Memmert IN30plus Incubator

Price on request

Tell us the quantity and we'll send a quotation with availability and delivery.

Malaysia-wide deliveryHelp choosing the right modelOne quote for your whole list

Product details

Memmert IN30plus Incubator

Memmert IN30plus is a 32 L natural-convection incubator with TwinDISPLAY control.

Temperature

Set temperature range in °C min. 5°C above ambient up to +80°C
Setting accuracy temperature 0.1 °C
Temperature sensor 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error

Control technology

ControlCOCKPIT TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Language setting German, English, Spanish, French, Polish, Czech, Hungarian
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT The process time does not start until the set temperature is reached.
Calibration Three freely selectable temperature values
Adjustable parameters Temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime
Sterilisation Fixed sterilisation programme (4 hours/160°C) for sterilisation of the working chamber, not for sterilising the load

Ventilation

Convection Natural convection
Fresh air admixture Adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment individually
Vent Vent connection with restrictor flap

Communication

Documentation Programme stored in case of power failure
Programming AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port

Safety

Temperature control Mechanical temperature limiter TB, protection class 1 according to DIN 12880, to switch off the heating approximately 20°C above nominal temperature
Temperature control Overtemperature monitor TWW, protection class 3.1, or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY Integrated over- and undertemperature monitor ASF follows the setpoint within a preset tolerance range; alarms on over- or undertemperature and switches off heating in case of overtemperature
Autodiagnostic system For fault analysis
Alarm Visual and acoustic

Standard equipment

Door Fully insulated stainless steel door with 2-point locking (compression door lock)
Internals One electropolished stainless steel grid
Works calibration certificate Included for +37°C
Door Inner glass door

Stainless steel interior

Interior Easy-to-clean stainless steel interior with deep-drawn ribbing and integrated, protected large-area heating on four sides
Volume 32 L
Dimensions 400 × 320 × 250 mm (width × height × depth)
Maximum number of internals 3
Maximum chamber load 60 kg
Maximum load per internal 20 kg

Textured stainless steel casing

Dimensions 585 × 704 × 434 mm (depth +56 mm for door handle)
Housing Rear zinc-plated steel

Electrical data

Voltage / electrical load 230 V, 50/60 Hz; approximately 1600 W
Voltage / electrical load 115 V, 50/60 Hz; approximately 800 W

Ambient conditions

Set-up At least 15 cm between the wall and rear of appliance, 20 cm clearance above, and 5 cm side clearance
Altitude of installation Maximum 2,000 m above sea level
Ambient temperature +5°C to +40°C
Humidity Maximum 80%, non-condensing
Overvoltage category II
Pollution degree 2

Packing and shipping

Transport information Transport upright
Customs tariff number 8419 8998
Country of origin Federal Republic of Germany
WEEE registration number DE 66812464
Dimensions including carton 660 × 890 × 650 mm
Net weight Approximately 48 kg
Gross weight Approximately 64 kg

Need a different model?

Tell us your sample type, capacity and budget. We'll suggest suitable models from the brands we supply.

Why CSI Labshop

  • Lab chemicals, consumables and instruments from one supplier
  • Malaysia-wide delivery
  • Help choosing the right model