SANPLATEC ACRYLIC VACUUM GLOVEBOX VSC-800
Features
First commercialization in Japan of this type of all acryl.
Insertion and removal of work devices is performed at left side door. In addition, insertion and removal of material samples during work is performed through a right pass box. Strength is designed to withstand even a complete vacuum.
The VG-800 is equipped with a 100V tap as standard. Use it when using a power supply at the inside.
* There is a record of delivery of chamber 3 coupling and work use vacuum chamber. Designed and manufactured to meet your site needs.
(Option examples)
Installation of electrode terminal 2 pins, 4 pins, and 16 pins, Gas introduction opening (inside, outside), Modifi cation of valve outside diameter.
Specification
| Outside Dimentions | 1209W x 648D x 660H mm | |
| Effective inner dimentions | 709W x 155D (Top) /370D (Bottom) x 450H mm | |
| Pass box inside dimensions | 310W x 200D x 200H mm | |
| Valve | Chamber | 2 |
| Pass box | 2 | |
| Glove port | 1 | |
| Pump connection side | 2 | |
| Vacuum gauges | Main chamber, Pass box 1 each (for 0 to -0.1MPa) | |
| Glove, glove with band | 1 set | |
| Glove port door | 1 set (used at decompression) | |
| Receptacle | 3P-2 serial taps | |
| Weight | Approx. 94kg | |
* Nozzle of hose nipple type valve is 9mm.
Note : Both the body and pass box of this vacuum glove box are so designed to withstand a complete vacuum, but since sudden suction and inhalation causes damage and deterioration of life to speed up, perform them as slowly as possible.
When using as a vacuum desiccator, always use with the glove cap installed.
The vacuum gauge shows the atmospheric pressure and glove box interior pressure difference. (Units: MPa)