Name: EVT2 Transport Logger

SKU: EVT2

Description:
EVt2 Transport Temperature Logger for multi journey use

Compact and easy to use, the EVt2 logger provides the most cost effective transport logging solution over any distance, from local to international deliveries. Use it too, in applications where simple, low cost temperature monitoring is needed.

EVt2 loggers are electronic, programmable and log data for permanent storage on a PC. Requires dedicated software and a computer interface to download data to a PC – see accessories.

Two versions of software are available, EVSW for general use and ideal for HACCP and other quality systems, EVSWPRO which aids compliance with 21CFR Part 11.

Tested to meet EN12830:1999.

• Compact logger, ideal for multiple trips or where a separate log is required for outward and return deliveries – just download to a PC after each trip and re-use
• Pre-programmed logging sequence ready for instant use
• Internal sensor
• Memory capacity up to 3000 readings
• Critical data shown on display
• Case certified waterproof to IP67 standards
• Up to 2 year battery life
• BioCote® antimicrobial protection

Detail:

Sensor Type	Thermistor
Measurement Range	-30°C to +70°C, -22°F to +158°F
Scales	°C, °F
Display Resolution	0.1°C
System Accuracy
-30°C to +70°C	±0.5°C
-22°F +158°F	±0.9°F
Channels	Single internal sensor only
Memory	3000 samples
Communications	Via infra red interface
Logging Frequency	Programmable between 1 second and 99 hours
Logging start/stop/LCD	Single multi-function button operation
Internal Sensor Response time	T90 = 15 to 30 minutes in ambient air
Ambient storage	-30°C to +70°C, -22°F to +158°F
Battery type	½ AA Lithium
Battery life	24 months
(Based on a 15 minute log rate
at +20°C/+68°F with alarms off)
Case Material	Food safe polycarbonate
LED Indication	Red = Alarm
	Green = Logger active
Dimensions
Length	88mm (including fixing lug)
Width	80mm
Depth	35mm

• EVT2 PDF

EVSW Software and New USB Cradle Drivers can be downloaded using these links.

• Download EVSW Software
• Download USB Cradle Drivers For Windows XP and Win 7 32 and 64-Bit
• Download Installation Guide

SKU: N2014Starter Kit

Description:
Diligence EV Thermocouple Data Logger with LCD Display

Diligence EV data loggers are lightweight and small enough to be used almost anywhere. Ideal for many applications including the food, pharmaceutical and chemical industries to monitor sensitive materials in transit or storage. The loggers are also ideal for building services, scientific experiments, production processes and heating, ventilating and air conditioning systems.

Requires dedicated software and a computer interface to download data to a PC. Two versions of software are available, EVSW for general use and ideal for HACCP and other quality systems, EVSWPRO which aids compliance with 21CFR Part 11.

For single channel operation select a probe with a Lumberg connector – L suffix.

For connection up to three channels use Adaptor N2000ADP/K for Type K or N2000ADP/T for Type T and select probes with a sub-miniature connector – suffix M.

• Features four channels for up to 3 external thermocouple probes or one external thermistor probe or one external thermocouple probe with thermistor at the cold junction
• Wide measurement ranges from -200°C to thermocouple limits, 400°C type T and 1372°C type K
• LCD Display for temperature readings and alarm indication
• Tough, moulded case, dust and waterproof to IP67 standards
• Large memory capacity of up to 16000 readings
• Ability to log over multiple periods
• Single, multi-function button
• LED indicators to show active logging and alarm conditions, plus audible alarm warning
• Temperature system accuracy, suitable for food industry applications
• Long battery life
• Two year warrantyKit includes:
• 1 x N2014 Data Logger
• 1 x N2000CRU Computer Interface
• 1 x EVSW EV SoftwareEverything you need to start logging!

Detail:

Sensor Type	Thermocouple type T
	Thermocouple type K
	Thermistor
Measurement Range
Type K	-200°C to +1372°C/-328°F to +2502°F
Type T	-200°C to +400°C/-328°F to +752°F
Thermistor	-40°C to +70°C/-40°F to +158°F
Scales	°C and °F
Resolution (Thermocouple)	0.2°C up to and including +300°C
	0.5°C above +300°C
Temperature accuracy
+20°C ambient	±0.5°C +0.3% of reading (Logger Only)
-20°C to +40°C ambient	±0.5°C +0.5% of reading (Logger Only)
-40°C to +70°C ambient	±1.0°C +1.0% of reading (Logger Only)
-20°C to +40°C ambient	±0.3°C Thermistor (System Accuracy with Thermistor)
-40°C to +70°C ambient	±0.5°C Thermistor (System Accuracy with Thermistor)
Memory 32K
1 channel	16000 samples
2 channels	8000 samples
3 channels	5300 samples
4 channels	4000 samples
Communications	Via infra red interface
Download Time	3 minutes for 10,000 readings (typical)
Logging Frequency	Programmable between 2 seconds and 99 hours
Internal Sensor Response time	T90 = 15 to 30 minutes in ambient air
Ambient Storage	-40°C to +70°C/-40°F to +158°F
Logging Start	Programmable date and time or manual start from instrument multi-function button
Software	Windows™ based software for Windows XP or Vista
Battery Type	1 x AA size 3.6V replaceable lithium battery
Battery Life	Up to 5 years
Case Material	ABS
Environmental Protection	IP67 BS EN 60529 IEC 529
LED Indication
Red	Alarm
Green	Logger Active
Dimensions
Length	88mm/3.5ins (including fixing lug)
Width	80mm/3.1ins
Depth	35mm/1.4ins

EVSW Software and New USB Cradle Drivers can be downloaded using these links.

• Download EVSW Software
• Download USB Cradle Drivers For Windows XP and Win 7 32 and 64-Bit
• Download Installation Guide

• N2000 PDF

Diligence EV Thermocouple Data Logger with LCD Display Accessories

N2000CRU	USB Computer Interface
A17476	Lithium Battery
N2000ADP/K	K Type Adapter for N2014
N2000ADP/T	T Type Adapter for N2014

Name: N2011 Starter Kit Internal Sensor Only

SKU: N2011Starter Kit

Description:
Diligence EV Temperature Data Logger with LCD DisplayDiligence EV data loggers are lightweight and small enough to be used almost anywhere. Ideal for many applications including the food, pharmaceutical and chemical industries to monitor sensitive materials in transit or storage. The loggers are also ideal for building services, scientific experiments, production processes and heating, ventilating and air conditioning systemsRequires dedicated software and a computer interface to download data to a PC – see accessories. Two versions of software are available, EVSW for general use and ideal for HACCP and other quality systems, EVSWPRO which aids compliance with 21CFR Part 11.Tested to meet EN12830:1999.

• Internal sensor with measurement range -40°C/-40°F to 70°C/ 158°F
• LCD Display for temperature readings and alarm indication
• Tough, moulded case, dust and waterproof to IP67 standards
• Large memory capacity of up to 16000 readings
• Ability to log over multiple periods
• Single, multi-function button
• LED indicators to show active logging and alarm conditions, plus audible alarm warning
• Temperature system accuracy, suitable for food industry applications
• Long battery life
• Two year warrantyKit includes:
• 1 x N2011 Data Logger
• 1 x N2000CRU Computer Interface
• 1 x EVSW EV SoftwareEverything you need to start logging!

Detail:

Sensor Type	Thermistor
Measurement Range	-40°C to +70°C/-40°F to +158°F
Scales	°C and °F
Display Resolution	0.1°
System Accuracy °C
-25°C to +50°C	±0.5°C
-40°C to +70°C	±1°C
System Accuracy °F
-13°F to +122°F	±1°F
-40°F to +158°F	±2°F
Memory 32K	16000 samples
Communications	Via infra red interface
Download Time	3 minutes for 10, 000 readings (typical)
Logging Frequency	Programmable between 1 second and 99 hours
Internal Sensor Response time	T90 = 15 to 30 minutes in ambient air
Ambient Storage	-40°C to +70°C/-40°F to +158°F
Logging Start	Programmable date and time or manual start from instrument multi-function button
Software	Windows™ based software for Windows XP or Vista
Battery Type	1 x AA size 3.6V replaceable lithium battery
Battery Life	Up to 5 years
Case Material	ABS
Environmental Protection	IP67 BS EN 60529 IEC 529
LED Indication
Red	Alarm
Green	Logger Active
Dimensions
Length	88mm/3.5ins (including fixing lug)
Width	80mm/3.1ins
Depth	35mm/1.4ins

EVSW Software and New USB Cradle Drivers can be downloaded using these links.