MMM Ecocell Drying OVens
The highly cost-effective heating oven series for simple drying processes. The ECOCELL line produces no noise and provides a very soft air convection within the chamber.
Volume: 55, 111, 222, 404, 707 litres
Working temperature: 5°C above ambient temperature up to 250°C
Interior: Stainless steel, mat. No. 1.4301 (AISI 304)
The versatile standard line with microprocessor control unit
• 3 programs
• RS 232 – interface for printer or PC-communication
• delayed heating start and stop function
• acoustic and visual alarm
• time range 99 hours 59 minutes
• digital safety thermostat type 2
• manual control of the air exhaust flap
The high-tech comfort line with multi-functional microprocessor control unit
• 6 programs
• chip card system for individual program storage
• RS 232 – interface for printer or PC-communication
• delayed heating start and stop function
• acoustic and visual alarm
• time range 0–40 years with 1 min-intervals
• digital safety thermostat type 2
• real time
• programming temperature ramps
• heating sequences
• programme cycles
• manual control of the air exhaust flap
KNF Diaphragm Pumps
NF 1.100 __.18 RC Pumps
The LIQUIPORT diaphragm liquid pumps of the NF 100/1.100_.18 RC series reliably pump neutral and aggressive liquids. The flow rate is adjusted by turning a knob with LED or it can be controlled remotely by means of a signal input of 0 to 10V. These pumps work quietly and with low vibrations.
Technical features:
- Acid, alkali, solvent resistant
- Self priming
- Dry running
- Maintenance-free
- Splashproof (IP 65)
- Flow rate manually or externally adjustable
- Standby mode
- Maximal pressure limitation
Daihan Ultrasonic Cleaners
Analog Ultrasonic Cleaners
Application & Features
- Useful for Cleanning to Remove Dirt, Grease, Waxes and Oil from all Lab Instruments by Ultrasonic Frequency
- Made of Stainless Steel, Finished Surface
- Analog Controller, Timer, Temperature and Output Control
- Temperature Range from Ambient to 85℃. (1.2 & 1.8 Lit. : 65℃ Fixed)
- Convenient Preset Function : Heating and Timer
- HF-Frequency : 40kHz for WUC-A03/06/10/22H models and 28kHz for WUC-A01H/A02H models
- Bottom-Mounted Drain (WUC-A10H and WUC-A22H)
- Maximum 30minutes Set Cleaning Time (Except WUC-A10H)
- PL(Product Liability)
Daihan Digital Magnetic Stirrers and Hotplates
Digital Multi-point Magnetic Stirrers
Application & Features
- Ideally Suitable for Use in Incubators and Climatic Chambers
- Excellent for Multi-use and wide range fo Sample Testing
- Synchronous Operation of 4 / 8 Stirring Points
- Increased Effectiveness by Microprocessor Control
- Digital LCD with Back-Light Function
- Up to 0.5 Lit. Stirring Capacity per Point
- Smooth Start and Change of Stirring Speed
- Digital Timer Function: 99 hr 59 min
- Storage Function for the Set Values : RPM and Timer
- Extraordinary Mechanical, Physical and Chemical Resistance
- Locking Mode supported for Experimental Safety (Input to Jog-Shuttle can be Disabled)
- Free Voltage (AC 80V ~ 240V, 50 / 60Hz) by SMPS
- Patented Jog-Shuttle Control System
- CE Certified
- PL(Product Liability)
