Motic BA210 LED Binocular

by | Feb 28, 2013 | Product News

Motic BA210 LED Binocular

Product Description

The BA210 is designed for both educational and teaching environments delivering a new higher level of optical performance.
The new BA210 series is setting a new standard in microscope performance through inprovements both in optical and mechanical features. Designed to be used in Educational Life Science, Medical as well as a variety of biological applications, this new microscope is built around Motic’s complete understanding of the daily demands placed on the standard educational microscope.

Student proof features together with a new generation of EF-N Plan Achromatic objectives provide a fully corrected intermediate image for crisp and clear visual and digital results.

The BA210 is a robust student instrument that brings professional, repeatable image quality results to all of its intended applications.

  • 30° inclined Binocular Siedentopf head for comfortable viewing while seated, rotates 360°
  • Interpupillary distance adjustment between 55-75mm
  • Widefield eyepieces N-WF10X/20mm with diopter adjustment on both eyepieces
  • Reversed quadruple nosepiece with click stops for precise magnification changes
  • CCIS EF-N Plan Achromatic objectives 4X/0.10, 10X/0.25, 40X/0.65 – Spring, 100X/1.25 – Spring/Oil
  • Coaxial coarse and fine focusing system with 2 micron minimum increment with tension adjustment
  • Vertical travel range 25mm
  • Large 140mm X 135mm mechanical stage with low-position coaxial controls. Travel range 76 X 50mm.
  • Focusable Abbe condenser N.A. 1.25 with iris diaphragm and slider slot.
  • LED illumination 3W with intensity control

BENCHTOP NMR ANALYSER – MQC

by | Feb 25, 2013 | Product News

BENCHTOP NMR ANALYSER – MQC

The benchtop NMR MQC analyser addresses a range of industry-specific Quality Control requirements using proven, reliable and simple-to-use technology.

In many industries there is a requirement to accurately, reliably and simply measure the amount of a viscous or liquid component in the presence of other solid materials. The MQC meets this requirement with a technology that avoids the needs to separate the different phases; making sample preparation trivial, removes the need for extensive operator training, and provides fast accurate results. That means a more consistent product from your manufacturing operations, better process control, and reduced costs.

Our development and applications teams have created industry-specific applications for the following:

  • Lubricant on fibre, yarn or textile – spin finish, oil pick up (OPU), finish on yarn (FOY), avivage
  • Oil content of oilseeds
  • Oil content of snack foods
  • Oil and fat content of foodstuffs
  • Solid Fat Content (SFC)
  • Xylene solubles in polypropylene
  • Oil or polybutadiene in polystyrene
  • Plasticiser in PVC
  • Hydrogen content of aviation and other fuels
  • Fluoride content of toothpaste

SANPLATEC Sterile Box(sterilization lamp specification plate)

by | Feb 21, 2013 | Product News

SANPLATEC Sterile Box(sterilization lamp specification plate)

Features

Solves the problem of acrylic plate degradation caused by the sterilization lamp

The DX type has a device that constantly circulates dry, sterile air through an acrylic housing which can be installed with a Japan Pall Corporation-made HEPA capsule filter (dust collection efficiency: 99.97%, 0.3 µm), silica gel and activated carbon.(It is possible to sterilize the HEPA capsule with ethylene oxide gas.)

One unit can be used as a sterilized box and dry box.

Uses a sterilization-resistant lamp plate.
Big opening makes it secure to place and remove microscopes and other devices.
Door can be locked so work can progress with security.

Code Model drawing
0228 U-DX type

Specification

Outside Dimension (mm) 995W x 575D x 530H
Pass box Inner dimension(mm) 170W x 190D x 190W
Weight Approx. 18kg
air circulating device one
gas cocks for filling 2 pieces
sterilization lamp; fluorescent lamp one of each (per one unit), 10 W
outlet double-barreled built-in outlet
Fan 50/60 Hz, 5/4 W
accessories One pair of gloves
Use as a dry box
Normally, air that has been adequately dried using silica gel is circulated, but including the use of nitrogen gas is even more effective. (Always install a decompression valve on the gas tank for use.)

1. Open the cock on the upper left-hand side of the main unit.

2. Inject the gas to the cock on the upper right-hand side of the main unit using the diameters 6mm tube.

3. This depends on the gas flow amount, gas will fill the inside in approximately three to five minutes, so close both gas stopper cocks on the tank.

 

Use as a sterile box
When using this under normal conditions, the sterilizing lamp is adequate. However, dry, sterilized air can be constantly circulated inside using an air filter device (removes more than 99.97% of the particles of 0.3 µm using the DOP test method) and silica gel (filled to approximately 80% of the silica gel tank).

1. Close the main unit door, and turn on the switches for the sterilizing lamp and fan.

2. When the sterilizing lamp is on, always mount the accessory shielding plate.

3. When using the pass box on the right of the main unit, open the outside door while the inside door is closed, and open the inside door after closing the outside door.

4. If the filter or silica gel is dirty, clogged or discolored, replace them.

SANPLATEC DRY-KEEPER C-type

by | Feb 21, 2013 | Product News

SANPLATEC DRY-KEEPER C-type

Non-auto type desiccator has a pan for silica gel and is convenient.

Non-auto type has a pan for silica gel and is convenient. Also use in applications other than dehumidifi cation.

Shelf plates can be adjusted in 15 steps at 28mm intervals to match the size of the stored items.
Slim vertical type design does not take up space.

 

          

*The inside humidity is slightly different depending on the set room temperature and usage conditions.

Code Model Specification Drawing
0030 C-3B Latch door type Shelf plate 3 plates  
0031 C-3W Latch door type Shelf plate 3 plates  
0032 C-3BS Latch door type Shelf plate 3 plates  
0004 Spare Shelf board (for C-3)

C: Vertical type, A: Horizontal type
B : Frame black; bodyclear transparent
W : Frame white; body clear transparent
BS : Frame black; body smokey transparent (which prevents deterioration and discoloring of the
stored items are offered.)

Specification

Outside dimentions 312W×390D×508H mm
Effective inner dimentions 255W×332D×425H mm
Material Body cabinet:PVC; Frame:ABS
Weight Approx. 5kg

Sanplatec Glove box G type for gas replacement

by | Feb 21, 2013 | Product News

Sanplatec Glove box G type for gas replacement

Features

You can easily desorb the body and bottom
and also set heavy load without effort. 

Glove box G type for gas replacement allows you to put in to the limit of heavy load or capacity because of its newly adopted desorption system of body/bottom.
Moreover, since the path box capable of decompression is equipped as standard, you can put in and take out in more stable condition, and can work promptly.

G type was designed and manufactured for heavy loads (instruments). It has a complete removability from 40mm of the bottom to superior.

Acrylic, Aluminium

Note : Please put on a flat location when installing.

Code Model drawing
6903 G type (PDF)

Specification

Outside Dimention(mm) 1007W x 588D x 570H
Inside dimension of body(mm) 692W x 340D(Top side) /470D(Bottom side) x 553H
Inside dimension of pass box (mm) 200W x 200D x 200H
Body Tap for gas substitution Two , (diameter 6mm tube one-touch type)
Valve for pass box Two, (Diameter of nozzle 9㎁E
Vacuum gauge for pass box One, (For 0 to -0.1MPa)
Glove, Glove fixing band One set
Weight Approx. 31kg