by williamsu | Oct 31, 2012 | Product News
ELGA PURELAB Option Q 15 (With Boost Pump)
The PURELAB Option Q 15 produces ultra pure water without the need for pre-purified feed. It can produce up to 15 l/hr of 18.2MΩ-cm water direct from a potable water supply
AAS (Atomic absorption spectrophotometry), Bacterial cell culture, Buffer and media preparation, Clinical biochemistry, Electrochemistry, Electrophoresis, Electrophysiology, ELISA (Enzyme linked immunoabsorbant assay), Endotoxin analysis, Flame-AAS, GC-MS, General chemistry, GF-AAS (Graphite Furnace – Atomic Absorption Spectrophotometry), Histology, HPLC, Hydroponics, IC (Ion chromatography), ICP-AES (Inductively Coupled Plasma – Atomic Emission Spectrometry), ICP-MS (Inductively Coupled Plasma – Mass Spectrometry), Immunocytochemistry, Mammalian and bacterial cell culture, Media preparation, Microbiological analysis, Molecular biology, Monoclonal antibody research, Plant growth cabinets, Plant tissue culture, Qualitative analyses, RIA (Radioimmunoassay), Sample dilution and reagent preparation, Solid phase extraction, Spectrophotometry, Stability chambers, TOC analysis, Trace metal detection, Ultra sonic bath, Ultra trace analysis, Water analysis
| Make-Up Rate |
15 l/hr |
| Delivery Flow Rate |
up to 1 l/min |
| Daily Usage (8hr day) |
< 100 l/day |
| Inorganics |
18.2 MΩ-cm |
| Organics (TOC) |
<3 ppb |
| Bacteria |
<0.1 CFU/ml (<1 CFU/10ml) |
| Endotoxins |
<0.001 EU/ml |
| DNase |
<20 pg/ml |
| RNase |
0.002 ng/ml |
| Footnotes |
Bacteria – Specification subject to use with a POU (point of use) Biofilter. If Biofilter not used, Bacteria level is <1 CFU/ml
TOCÂ – Specification dependant on feedwater
Endotoxin – Specification subject to use with a Biofilter
DNase/RNase – Specification subject to use with a Biofilter |
| Feedwater Nature |
Potable supply (Tap Water) |
| Conductivity |
<1400 µS/cm |
| Fouling Index |
<10 |
| Total Chlorine |
0.5 ppm |
| Silica |
30 ppm |
| Temperature |
1-35 °C |
| Flow Rate |
<85 l/hr |
| Drain (gravity fall with air gap) |
70 l/hr |
| Min. Pressure |
Flooded suction with internal boost pump |
| Max. Pressure |
2 bar (30 psi) with internal boost pump |
by williamsu | Oct 31, 2012 | Product News
ELGA PURELAB flex 3
The PURELAB flex 3 polishes Tap water to Ultrapure Type I water in one step. The intuitive to use, but sophisticated hand dispenser allows you to precisely dispense any chosen specific volume of water, at the exact quality you need.
• Absolute water purity of up to 18.2 MΩ-cm
• Ergonomic handset shows your essential water purity information
• Intelligent Real Time TOC monitoring
• Unique choice of water dispense options
• Perfect for your analytical and life science applications
Electrochemistry, Electrophoresis, Feed Autoclave / steriliser, Feed to ultra pure water systems, GF-AAS (Graphite Furnace – Atomic Absorption Spectrophotometry), HPLC, Hydroponics, IC (Ion chromatography), ICP-AES (Inductively Coupled Plasma – Atomic Emission Spectrometry), ICP-MS (Inductively Coupled Plasma – Mass Spectrometry), Mammalian and bacterial cell culture, Molecular biology, Plant growth cabinets, Plant tissue culture, Qualitative analyses, Stability chambers, Steam generators, Steriliser feed
| Delivery Flow Rate |
up to 2 l/min |
| Daily Usage (8hr day) |
< 10 l/day |
| Technologies |
185/254 nm UV, Deionization, Recirculation, Reverse Osmosis |
| Inorganics |
<18.2 MΩ-cm |
| Organics (TOC) |
<5 ppb |
| Bacteria |
<0.1 CFU/ml (<1 CFU/10ml) |
| Endotoxins |
<0.001 EU/ml |
| DNase |
<20 pg/ml |
| RNase |
0.002 ng/ml |
| Footnotes |
Type III / RO water also available straight from internal reservoir. |
| Feedwater Nature |
Potable supply (Tap Water) |
| Conductivity |
<2000 µS/cm |
| Fouling Index |
<10 |
| Chloramine |
< 0.2 ppm |
| Total Chlorine |
0.5 ppm |
| Free Chlorine |
<0.5 ppm |
| Carbon Dioxide |
<30 ppm |
| Silica |
<30 ppm |
| Temperature |
4 – 40°C |
| Flow Rate |
< 75 l/hr |
| Drain (gravity fall with air gap) |
> 90 l/hr |
| Min. Pressure |
2 bar (30 psi) |
| Max. Pressure |
6 bar (90 psi) |
| Footnotes |
A 0.2 micron membrane pre filter is recommended for all non-RO feeds to extend point-of-use filter life. If the pressure is <56psi (4 bar) a separate boost pump is recommended. |
by williamsu | Oct 31, 2012 | Product News
Iramac would like to promote you the economic FB-1310M-33 Themolyne 1.3 litre furnace. The product has ceramic fiber that permits faster heat-up, reduces energy consumption. Besides, with embedded heating element on top and both sides help improves temperature uniformity. It operates by using digital single set point control. For more details on product specifications, please do not hesitate to contact us.
by williamsu | Oct 18, 2012 | Product News
BagLight® range
Plain bags: PolySilk® Standard
This section’s articles
-
Available in 100, 400 & 3500 ml
-
Available in 400 ml
-
Available in 400 ml
-
Available in 400 ml
by williamsu | Oct 18, 2012 | Product News
BagMixer® Premium Pack
 Top quality lab!
BagMixer® Premium Pack is the best and quickest way to equip your lab with high-quality tools. BagMixer® 400 is an easy-to-use and powerful lab blender. Adapted to all kinds of applications and with a guarantee of optimal bacterial extraction, it is a great tool for lab analyses avoiding all risks of cross-contamination.
 Ref. Pack Prem
-
Â