by williamsu | Jan 3, 2017 | Product News
Laboratory Freezers
with explosion-proof interior
TÜV-certified explosion proofness: Our LABEX®-Laboratory Freezers fulfill the safety requirements for explosion-proof areas of zone 2 (ATEX 94/9EG) and guarantee that the interior is free of ignition sources.
Laboratory freezers with explosion-proof interior from KIRSCH are TÜV tested according to basic safety and health requirements according to guideline 94/9/EC (ATEX) Annex II, EN 1127-1:1997, BGR 120 (October 1993), figure 3.8, as well as to the EC Low-Voltage Directive 2006/95/EC and Electromagnetic Compatibility 89/336 EEC. Now available in Malaysia with local warranty and full parts and service.
BUILT ACCORDING TO THE DIRECTIVE 94/9/EC (ATEX 95)
- Intrinsically safe supply of all electronic components (all FROSTER-LABEX®-models with forced-air cooling)
- Structural safety for all non-electrical components (all FROSTER-LABEX®-models with forced-air cooling)
- Energy restriction of the power circuits on the interior according to guideline 94/9/EC
– Temperature sensors are protected by safety barriers
– Door frame heating approved according to temperature class T6
- Ground protection for the complete refrigerator interior (potential equality)
- Material combinations on the inside are non-combustible
- Freezer interior is not opened to the outside (manual removal of melt water)
- Testing and approval according to guideline 94/9/EC (ATEX) by TÜV SÜD Product GmbH with certificate
- Production facilities are inspected by an independent accredited company
- The interior has the marking:
II 3 G T6
 |
 Temperature
 Isololation
 Interior Container
 Interior Equipment
 Door
 Perspective
|
|
Temperature
There are large temperature ranges available for storing goods: from -5 to -30°C.
Isolation
The housing is insulated with particulary good, environmentally-compatible pressure foam material to guarantee low energy consumption levels.
Interior Container
The interior is made of smooth aluminium with a transparent protective coating or of impact-resistant plastic with moulded supports. |
|
Interior Equipment
The drawers/shelves are adjustable within a 15mm raster for refrigerators with the interior of smooth aluminium sheet. The longituduinal amd cross dividers within the drawers are individually adjustable.
Door
The lockable door has a plastic magnetic sealing frame that is easy to replace and Door frame heating. There is no overhang when the door is open. Door hinge on the right as standard, however this can be changed to the left.
Perspective
All models are also available with insulated glass door |
by williamsu | Jan 3, 2017 | Product News
Kirsch, Germany is a global leader in temperature stability. The line of laboratory cooling KIRSCH cools without compromise – also highly flammable chilled goods: Labex models with explosion proof interior. Now available in Malaysia with local warranty and service.
Laboratory Refrigerators
Optimal conditions for your sensible goods. Because laboratory refrigerators by KIRSCH are leading worldwide in temperature stability. They are also available as explosion-proof versions.
ESSENTIAL-LINE
The ESSENTIAL-Line is your entry into KIRSCH-quality. It is designed and aimed for the essentials in terms of cooling. It offers robustness, temperature stability, and various interior options according to your needs.
If you prefer to document the temperature with a mechanical chart recorder instead of digital, PC-based monitoring, the ESSENTIAL-LINE is your best match.
more »
Temperature stability and almost no temperature differences in the interior part are some of the key features. Each laboratory refrigerator is also robust and reliable. Therfore perfect for your sensitive goods.
more »
EXPLOSION-PROOF VERSION
TÜV-certified explosion proofness: Our LABEX®- Laboratory Refrigerators fulfill the safety requirements for explosion-proof areas of zone 2 (ATEX 94/9EG) and guarantee that the interior is free of ignition sources…
more »
EXPLOSION-PROOF WITH FORCED-AIR COOLING
A maxiumum of explosion proofness and a maxiumum of temperature consistency thanks to our LABEX® technology and the adapted KIRSCH-re-circulating air cooling (optimized air guide panels). The unique combinatin of intrinsically safety, automatic defrosting and re-circulating air cooling lead to the safest and best storage conditions for your goods.
more »
Laboratory Freezers
KIRSCH Laboratory Freezersstand out particularly thanks to their thick housing insulation made of high-quality, pressure-foamed material. Our LABEX models are explosion proof and fulfill the ATEX 94/9/EC guideline. The storage temperature can be adjusted between -5 °C and -30 °C depending on the model.
BASIC MODEL WITHOUT EXPLOSION-PROOF INTERIOR
| Maximized temperature stability and a thick housing insulation made of high-quality, pressure-foamed material. Each laboratory freezer guarantees a safe storage for your sensitive goods.
more » |
 |
EXPLOSION-PROOF
| TÜV-certified explosion proofness: Our LABEX laboratory freezers fulfill the safety requirements for explosion-proof areas of zone 2 (ATEX 94/9EG) and guarantee that the interior is free of ignition sources…
more » |
 |
EXPLOSION PROOF AND RE-CIRCULATING AIR COOLING
| We provide you with a maxiumum of explosion proofness and a maxiumum of temperature consistency- thanks to our LABEX® technology and the adapted KIRSCH-re-circulating air cooling (optimized air guide panels). The unique combinatin of explosion proofness, automatic fast defrosting, controlled decompression and re-circulating air cooling lead to the safest and best storage conditions for your goods.
more » |
by williamsu | Jan 3, 2017 | Product News
Autoclaves SX series LineUP
Speedy Autoclaves
Maximized chamber capacity at Minimum installation space
Easy operation using the “Top-open lid”
A top-open lid, which can be operated easily with a single hand or foot, is provided with the SX autoclaves. To open the lid, the lid lock is released by stepping on the foot pedal locates at the bottom while pressing the lid down. The lid can be opened with minimal effort owing to mechanical assistance. In addition, the lid can be closed easily just by pressing it down.
Saving the installation space
The main body is very compact owing to the design which provides thorough installation space saving. In addition, installation space at the side of the main body which is required for models employing a slide-open lid, which is not necessary at SX autoclaves top-open lid. Even when several SX autoclaves are installed side-by-side, the necessary installation space is minimized.
A : 790mm(SX-300),970mm(SX-500),1003mm(SX-700)
B : 614mm(SX-300),794mm(SX-500),827mm(SX-700)
C : 410mm(SX-300/500),470mm(SX-700)
Easily viewable “work monitor”
The LED display shows working status for easy monitoring. The process being performed is indicated by an LED indication lamp blinking in red.
The illuminated display on the operating panel shown in the picture is different from the actual display at the time of operation.
Cooling fan provided as a standard feature
A rapid air-cooling function (vessel-cooling fan) permitting reduction of chamber cool down time is provided as a standard feature. This is most appropriate for lowering the temperature rapidly on completion of the cycle. The time required for lower the temperature is much reduced by employment of the cooling fan in comparison with natural cooling.
Sterilizing course selection
The optimal sterilizing course can be selected from among five courses, such as the liquid sterilizing course in addition to that for normal sterilization.
Other features
Large indication lamp “Operated”
An easily viewable large indication “Operated” is provided at the upper section of the operating panel.
Depending on the pressure status (normal pressure/pressure is applied),the displayed color changes.
Setting to 100°C is possible.
Variable temperature setting such as to 100°C as well as to 121°C has been made possible.The temperature can be set within the range from 45°C to 135°C in steps of one degree (heating mode up to 104°C).
Auto-variable exhaust speed
A function allowing the exhaust valve to open automatically after completion of sterilization is provided. The exhaust speed can be set to one of six levels (set to variable for liquid sterilization）
Timer function
The operation starting time can be preset easily. By presetting the start of operation, otherwise wasted periods at night or early morning, can be used effectively.
Setting to 100°C is possible.
Variable temperature setting such as to 100°C as well as to 121°C has been made possible.The temperature can be set within the range from 45°C to 135°C in steps of one degree (heating mode up to 104°C).
Lid interlock
A safety device (lid interlock mechanism) for locking the lid during operation is provided. A high level of safety is assured to prevent unanticipated accidents.
Pressure fine adjustment function
When the balance between the temperature and pressure deviates during sterilization, fine exhausting is carried out automatically in order to adjust the best chamber condition.
Functions & Features
Liquid sterilizing / Heating / Warming / Check / Last-run memory / Built-in steam exhaust bottle
Flat internal surface of the chamber / Lid opening/closing detection mechanism
Exhaust bottle detection mechanism / Leakage breaker provided
OPTION
External sensor for the articles to be sterilized
Sensor for directly detecting the temperature of articles to be sterilized. More reliable sterilization monitor can be carried out.
Data output
The temperature data, pressure data, etc. can be exported. The temperature can be recorded when the external recorder is connected.
External sensor and recorder
A temperature sensor and recorder independent of the autoclaves. The chamber temperature can be recorded.
SX Specifications
| Model name |
SX-300 |
SX-500 |
SX-700 |
| Operating temperature range |
Sterilizing |
105 ∼ 135°C（0.019 ∼ 0.212MPa） |
| Heating |
45 ∼ 104°C（0 ∼ 0.015MPa） |
| Warming |
45 ∼ 95°C |
| Maximum operating pressure |
0.263MPa |
0.25MPa |
| Temperature |
Display |
Digital |
| Pressure gauge |
Display |
Analog |
| Display range |
0 ∼ 0.4MPa |
| Heat source |
1.5kW electric heater |
2kW electric heater |
3kW electric heater |
| Safety device |
• Water level sensor, • Current leakage breaker, • Lid interlock, • Over-heat prevention, • Over-pressure prevention, • Open temperature sensor detection, • Safety valve |
| Time |
Display |
Digital |
Display
range |
Sterilizing |
0:00 – 9:59, 0 – 99hours, 0 – 999min.(0:00 – 9:59,10 – 99hours changeable) |
| Heating |
| Warming |
Variable: 0 – 99hours |
| Chamber dimensions |
φ325 x 553mm |
φ325 x 733mm |
φ370 x 774mm |
| Chamber capacity |
Effective internal
volume:36L,
Internal volume:44L |
Effective internal
volume:50L,
Internal volume:58L |
Effective internal
volume:69L,
Internal volume:79L |
| Chamber material |
SUS304 |
| Dimensions (mm) |
410W x 477D x 790Hmm
(With protruding:574D) |
410W x 477D x 970Hmm
(With protruding:574D) |
470W x 528D x 1003Hmm
(With protruding:625D) |
| Weight |
50kg |
60kg |
72kg |
| Rated voltage |
120V AC |
– |
| 230V AC |
| Power input |
13A/120V |
17A/120V |
– |
| 7A/230V |
9A/230V |
13A/230V |
| Required power supply |
Single-phase 120V AC
(50/60 Hz)15A or more |
Single-phase 120V AC
(50/60 Hz)20A or more |
– |
Single-phase 230V AC
(50/60 Hz)10A or more |
Single-phase 230V AC
(50/60 Hz)15A or more |
Single-phase 230V AC
(50/60 Hz)15 A or more |
| Power consumption (calorific value) |
1.5kW (1290kcal/h) |
2.0kW (1720cal/h) |
3.0kW (2580cal/h) |
| Environmental Conditions |
When opereting the autoclave, observe the environmental conditions given below.
Ambient temperature: 10 to 35°C
Almospheric pressure: 860 to 1060hPa
Relative humidity: 30 to 85%
Maximum gradient: 2 |
| Accessories |
Stainless baskets 1
(φ300 x 182mm) |
Stainless baskets 2
(φ300 x 182mm) |
Stainless baskets 2
(φ345 x 181mm) |
| • Chanber bottom Plate 1, • Caster stoppers 4, • Operator’s Manual 1, • Clear folder (for storing the operation manual) 1, • Screw (for attaching the clear folder) 1, • Warranty card 1, • Customer card 1, • Inspection Sheet 1 |
SX-E Specifications
| Model name |
SX-300E |
SX-500E |
SX-700E |
| Operating temperature range |
Sterilizing |
105 ∼ 135°C (0.019 ∼ 0.212MPa) |
| Heating |
45 ∼ 104°C (0 ∼ 0.015MPa) |
| Warming |
45 ∼ 95°C |
| Maximum operating pressure |
0.263MPa |
0.25MPa |
| Temperature |
Display |
Digital |
| Pressure gauge |
Display |
Analog |
| Display range |
0 – 0.4MPa |
| Heat source |
1.5kW electric heater |
2.0kW electric heater |
3.0kW electric heater |
| Safety device |
• Water level sensor, • Leakage breaker, • Lid interlock, • Over-heat prevention, • Over-pressure prevention, • Temperature sensor break detection, • Safety valve |
| Protection type against electrical shock |
Class I equipment |
| Time |
Display |
Digital |
Display
range |
Sterilizing |
0:00 – 9:59, 0 – 99hours, 0 – 999min.(0:00 – 9:59,10 – 99hours changeable) |
| Heating |
| Warming |
Variable: 0 – 99hours |
| Pressure chamber type |
PED Category II |
| Chamber dimensions |
φ325 x 553mm |
φ325 x 733mm |
φ370 x 774mm |
| Chamber capacity |
Effective internal
volume:36L,
Internal volume:44L |
Effective internal
volume:50L,
Internal volume:58L |
Effective internal
volume:69L,
Internal volume:79L |
| Chamber material |
SUS304 |
| Dimensions (mm) |
410W x 477D x 790Hmm
(With projection:574D) |
410W x 477D x 970Hmm
(With projection:574D) |
470W x 528D x 1003Hmm
(With projection:625D) |
| Weight |
50kg |
60kg |
72kg |
| Rated voltage |
230V AC |
| Power input |
7A |
9A |
13A |
| Required power supply |
Single-phase 230V AC
(50/60 Hz)10 A or more |
Single-phase 230V AC
(50/60 Hz)15 A or more |
Single-phase 230V AC
(50/60 Hz)15 A or more |
| Power consumption (calorific value) |
1.5kW(1290kcal/h) |
2.0kW(1720kcal/h) |
3.0kW(2580kcal/h) |
| Environmental Conditions |
When opereting the autoclave, observe the environmental conditions given below.
Ambient temperature: 10 to 35°C
Almospheric pressure: 860 to 1060hPa
Relative humidity: 30 to 85%
Maximum gradient: 2 |
| Accessories |
Stainless baskets 1
(φ300×182 mm) |
Stainless baskets 2
(φ300×182 mm) |
Stainless baskets 2
(φ345×181 mm) |
| • Caster stopper 4, • Chamber bottom Plate 1, • Operator’s Manual 1, • Clear Plastic Accessory Case 1, • Attachment Screw for Clear Plastic Accessory Case 1, • Inspection Sheet 1, • Warranty card 1, • Customer card 1 |
*Please refer to the「 EC Declaration of Conformity」for detailed standard application.
* Specifications and design are subject to change for improvement without prior notice. Please ask for the latest specifications prior to your order and procurement.
by williamsu | Jan 3, 2017 | Product News
The Hirayama HVE-50 autoclave sterilizer is a self-contained, portable, top-loading autoclaves with auto exhaust and warming cycles.
The top loading feature with the lid opening upward is not only a great space-saving design benefit, it also means that this sterilizer is also desirable and particularly suited for the sterilizations of large fermenter vessels so is the perfect companion for fermenters like the Winpact fermenter
Hirayama HVE-50 autoclave sterilizer has a convenient agar sterilization mode for sterilizing agar and then automatically maintaining it at liquid temperature. A dual-sensing lid interlock shut and prevents lid opening when chamber is pressurized or when temperature exceeds 97°C.
The HVE-50 autoclave from Hirayama also features an agar melting mode for melting agar and maintaining it at liquid temperature. This also is convenient for hot, faster start-up.
The autoclave has a convenient one-touch lever to easily open and close chamber lid. An in-process display shows the status and the progress of sterilization cycle. Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly.
| HV series |
 |
| The Most Advanced Autoclaves with Unique Features |
 |
Electromechanical lock system |
| By only using a one-touch lever, you con easily and safely Lock & Open the lid |
  |
*Electromechanical lock system
*Dual-sensing interlock mechanism
*Double-sensing system for air evacuation
*Programmable auto start
*Process status display
*Process mode for agar |
Retrofittable accessories (Any combination possible)
A : Forced cooling unit
F : Floating sensor
P : Digital printer
W : Automatic water supply
Z : All combined(A+F+P+W) |
Model
Effective capacity
Chamber size（㎜)
Outer dimensions
(W×H×D㎜)
Max.Steril.temp
Process mode
Net weight |
HV-25
25liter
240φ×550D
480×950×460
126℃
4-modes
41kg |
HV-50
50liter
300φ×710D
510×1040×530
135℃
4-modes
57kg |
HV-85
85liter
420φ×615D
660×1000×650
135℃
4-modes
71kg |
HV-110
110liter
420φ×795D
660×1180×650
135℃
4-modes
81kg |
| HVA-85/110 |
|
 |
Economical Autoclave for 85/110 Liter Capacities,
but Improved Basic Performance with Built-in Cooling Fan |
*Electromechanical lock system
*Dual-sensing interlock mechanism
*Pulse Exhaust System
*Memory function
(Program your own)
*Space-saving design
*Process status display |
Model
Effective capacity
Chamber size（㎜)
Outer dimensions
(W×H×D㎜)
Max.Steril.temp
Process mode
Net weight |
HVA-85
85 liter
420φ×615D
667×1011×652
135℃
3-modes
78kg |
HVA-110
110 liter
420φ×795D
667×1191×652
135℃
3-modes
85kg |
| HVE-50 |
|
 |
New and Economic Autoclave based
on Unique Features of HV series |
*Electromechanical lock system
*Dual-sensing interlock mechanism
*Pulse Exhaust System
*Memory function
(Program your own)
*Space-saving design
*Process status display |
Effective capacity : 50liter
Chamber size(㎜) : 300φ×710
Outer dimensions(W×H×D㎜):
547×1046×532
Max.Steril.temp : 135℃
Process mode : 3-modes
Net weight : 57kg |
| HVP-50 |
|
 |
New Vertical Autoclave with Vacuum Pump and Drying Cycle |
*One-touch Lid Interlock System
*Vacuum Pump built-in |
Effective capacity : 50liter
Chamber size(㎜) : 300φ×710D
Outer dimensions(W×H×D㎜) :
540×1040×630 |
Max.Steril.temp : 135℃
Process mode : 4-modes
Net weight : 80kg |
by williamsu | Dec 20, 2016 | Product News
We are ushering in the New Year 2017 at CSI Labshop Malaysia with an irresistible offer. In appreciation of your loyal patronage when you buy more than RM25,000 in a single order at CSI Labshop Malaysia, get a free Berkey Light Water Purifier when you purchase more than RM25,000 in a single order made during 2017. Berkey Water purifiers are the most powerful and most affordable drinking water purifiers for your lab, home or office.
Berkey Light Water Purifiers are also available exclusively for purchase at http://www.berkeywater.my
by williamsu | Dec 19, 2016 | Product News
Favorit Water Stills have been in service for more than 20 years in the laboratories all over the world. It is the most popular brand of water stills in Malaysia and its proven reliability and dependability to consistently give purified distilled water without compromise to quality. Favorit water stills are also the most powerful and affordable water stills for your laboratory. You can find thousands of Favorit water stills deployed in laboratories all over Malaysia in research laboratories, universities, schools, and industries. Choose from 4 models. Single distillation and double distillation models are available. All models come with standard one year warranty.
FAVORIT W4L Water Stills (Best-Selling Model)
Features
- Horizontal thick wall heat resistant borosilicate glass boiler fitted with 3 KW chromium plated heater.
- High efficiency coil condenser ensure low temperature, high output quality distillate of conductivity 3 to 4μs/cm.
- Compact construction suitable for bench and wall mounting.
- Screwthread connectors enable easy fitting or removal of hose safely.
- Built-in constant level device with Schott Vendura-Nova valve for drainage provides easy descaling without dismantling.
- Safety thermostat built into the heater protects the Favorit water still in the event of water supply failure and automatically resets when the water supply is restored.
Technical Specifications
| Distillate output |
4 litres per hour, single distilled |
| Water Supply Requirement |
1 litre / min (Min pressure 3 p.s.i )(0.2 x 105NM-2) |
| pH |
5.0 to 6.5 |
| Conductivity |
3.0 to 4.0 µs/cm |
| Temperature |
25 to 35 ºC |
| Pyrogen Content |
Pyrogen free |
| Power Requirement |
220/240v , 50/60 Hz single phase, 13A fused |
| Dimension (d x w x h) |
50 x 15 x45 cm |
FAVORIT WCS4L Cabinet Water Stills
FAVORIT WCM4L Cabinet Water Stills
FAVORIT WCS8L Cabinet Water Stills
