IKA KS 4000i control

by Jeffrey Justin K | Jun 3, 2013 | Promotional Offers

IKA KS 4000i control

– Large LED display for speed and time settings
– Controls with antimicrobial coating for reduction of bacteria
– Integrated PID temperature control (use of two PT 1000 temperature sensors)
– Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60 (included with delivery)
– Electronic temperature and speed control
– Electronic timer switch: 0 – 999 h (set by the minute or by the hour)
– Unit stops automatically when hood is lifted
– Collecting tray with drain hose on rear of unit
– Simple operation
– All functions can be controlled and documented using the labworldsoft® software
– Attachments not included – please order accessories as required

Memmert CO2 Incubator 108L

by Jeffrey Justin K | Jun 3, 2013 | Promotional Offers

Memmert CO2 Incubator 108L

• uniform atmosphere and temperature distribution owing to enclosed, non-turbulent ventilation system in working chamber
• adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
• integral fault diagnostics on temperature, CO2 and humidity limit control
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting
• digital display (LED) of all set parameters, such as temperature, weekdays, time, CO2, humidity and set-up values – language to be chosen in setup
• CO2-supply via sterile filter
• digital electronic CO2 control with automatic zeroing (infrared measuring system) – range of adjustment 0-10% – resolution 0,1%
• intrinsic adjustment of altitude above sea level
• CO2-supply being interrupted upon door opening
• digital display of set and actual values (LED) of temperature (0,1 °C resolution) and of CO2-concentration (0,1%)
• integrated humidity limit control (88-97%) with digital display of relative humidity – resolution of display: 0,5%, setting accuracy: 1%
• programme stored on power failure
• chip card (STERICard) for sterilisation of working chamber with fixed cycle (4 hrs./160 °C) without removal of sensors and mountings

• large-area multi-function heating system with additional door and back heating to avoid condensation
• incl. works calibration certificate for +37 °C

• with audible and visual alarm in case of over-/undertemperature and over-/under-CO2, open door and empty gas cylinder
• independently working, digitally adjustable electronic overtemperature controller TWW protection class 3.1
• additional integral over- and undertemperature monitor “ASF” (Auto-Safety-Function) automatically following the setpoint value at a preset tolerance range; audible alarm is activated in case of over- or undertemperature, heating is switched off in case of overtemperature
• resolution of display and setting accuracy: 0,1 °C
• mechanical temperature limiter TB protection class 1 switching the heating off at approx. 10 °C above max. oven temperature

• w x h x d: 710 x 778 x 550 mm
• fully insulated stainless steel door with double locking and 4-point adjustment
• inner glass door with opening (8 mm dia.) to take gas samples
• rear zinc-plated steel

• w x h x d: 560 x 480 x 400 mm, 108 l
• easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing, material no. 1.4301 (ASTM 304), hermetically welded
• 2 perforated stainless steel shelves, 1 stainless steel water dish

• from +20 °C (however, at least 8 °C above ambient temperature) up to + 50 °C
• temperature variation in time: < +/-0,1 °C (to DIN 12 880: 2007-05)
• temperature uniformity in chamber at 37°C: < +/- 0.3 °C (to DIN 12 880: 2007-05)

• 230 V (+/- 10%), 50/60 Hz
• ca. 1.000 W (during heating)

Esco Biological Safety Cabinet

by Jeffrey Justin K | Jun 3, 2013 | Promotional Offers

The Industry’s Most Certified Biological Safety Cabinet

Esco’s Labculture® Class II Type A2 Biological Safety Cabinet combines a multitude of design, construction and proprietary technological considerations to bestow optimum operator, product and environmental protection. Utilizing 2 minipleat ULPA filters which operate at a typical efficiency of 99.999%, these surpass the conventional HEPA filters in contamination protection. It features a 10-degree sloped front for maximum operator comfort. A 1-piece stainless steel workzone and the absence of screws or connectors in the work zone facilitate ease of cleaning. The Isocide™ antimicrobial powder coating eliminates surface bacteria within 24 hours of exposure.

The Labculture is the industry’s most certified biosafety cabinet, tested and certified to these international standards:

• NSF certified to NSF/ANSI 49
• HPA certified to EN 12469
• SFDA certified to YY0569
• JACA certified to JIS K3800

VELP Advanced Vortex Mixer – ZX3

by Jeffrey Justin K | Jun 3, 2013 | Promotional Offers

VELP Advanced Vortex Mixer – ZX3

Vortex mixer with adjustable stirring speed, with touch or continuous mode. The best-seller!

The ZX3 is a modern and universal vortex mixer with variable stirring speed and two operating modes, touch or continuous.
The technopolymer structure ensures optimum chemical resistance and enhanced handling.
The ergonomic and highly innovative design along with the zinc base ensure an excellent stability on the bench, usable on many surfaces.
The best-seller ZX3 offers an excellent flexibility, thanks to the broad range of accessories, ideal for many applications including mixing of many kind of tubes/containers.
Incredibly adjustable and long-lasting, ZX3 offers the highest performance for an excellent mixing.

Electronic speed regulation:
up to 3000 rpm

Operating modes:
touch, continuous

Thermo Scientific Orion Star A121 pH Portable Meter

by Jeffrey Justin K | Jun 3, 2013 | Promotional Offers

Thermo Scientific Orion Star A121 pH Portable Meters combine simplicity with accuracy. A large LCD displays pH or mV readings along with temperature. Icons provide quick updates on battery life, electrode status and calibration information. Simple button layout and onscreen messages help with calibration and setup menu choices.