SANPLATEC STERILE BOX (Normal Acrylic plate)

by | Jun 14, 2013 | Product News

SANPLATEC STERILE BOX (Normal Acrylic plate)

Features

Simple design standard sterilized box

Large opening makes for superior ease-of-use. Also, provided a lock to ensure work is secure.

Economical because you can select and mount the necessary parts.

Consult with us for use of the sterilizing lamp installation, sterilizing-resistant lamp specification plate.

Acrylic

Code Model
0186 ST-1 type  
0187 ST-2 type  

Specification

Model ST-1 type ST-2 type
Outside Dimension (mm) 650W x 475D x 530H 930W x 575D x 530H
Effective inner dimension(mm) 590W x 420D x 460H 700W x 515D x 460H
Pass box
Pass box inside dimension(mm) 170W x 190D x 190W
Weight Approx. 11kg Approx. 15kg
accessories One pair of gloves

Acrylic Sterile Box(sterilization lamp specification plate)

by | Jun 14, 2013 | Product News

Solves the problem of acrylic plate degradation caused by the sterilization lamp

Solves the problem of acrylic plate degradation caused by the sterilization lamp

The DX type has a device that constantly circulates dry, sterile air through an acrylic housing which can be installed with a Japan Pall Corporation-made HEPA capsule filter (dust collection efficiency: 99.97%, 0.3 µm), silica gel and activated carbon.(It is possible to sterilize the HEPA capsule with ethylene oxide gas.)

One unit can be used as a sterilized box and dry box.

Uses a sterilization-resistant lamp plate.
Big opening makes it secure to place and remove microscopes and other devices.
Door can be locked so work can progress with security.

Code Model drawing
0228 U-DX type (PDF)

Specification

Outside Dimension (mm) 995W x 575D x 530H
Pass box Inner dimension(mm) 170W x 190D x 190W
Weight Approx. 18kg
air circulating device one
gas cocks for filling 2 pieces
sterilization lamp; fluorescent lamp one of each (per one unit), 10 W
outlet double-barreled built-in outlet
Fan 50/60 Hz, 5/4 W
accessories One pair of gloves
Use as a dry box
Normally, air that has been adequately dried using silica gel is circulated, but including the use of nitrogen gas is even more effective. (Always install a decompression valve on the gas tank for use.)1. Open the cock on the upper left-hand side of the main unit.2. Inject the gas to the cock on the upper right-hand side of the main unit using the diameters 6mm tube.3. This depends on the gas flow amount, gas will fill the inside in approximately three to five minutes, so close both gas stopper cocks on the tank. 

Use as a sterile box
When using this under normal conditions, the sterilizing lamp is adequate. However, dry, sterilized air can be constantly circulated inside using an air filter device (removes more than 99.97% of the particles of 0.3 µm using the DOP test method) and silica gel (filled to approximately 80% of the silica gel tank).

1. Close the main unit door, and turn on the switches for the sterilizing lamp and fan.

2. When the sterilizing lamp is on, always mount the accessory shielding plate.

3. When using the pass box on the right of the main unit, open the outside door while the inside door is closed, and open the inside door after closing the outside door.

4. If the filter or silica gel is dirty, clogged or discolored, replace them.

Branson Sonifier® ultrasonic cell disruptor / homogenizers

by | Jun 14, 2013 | Promotional Offers

Branson Sonifier® ultrasonic cell disruptor / homogenizers

 

Branson Sonifier® ultrasonic cell disruptor / homogenizers are versatile laboratory units suitable for a broad range of liquid processing applications.

Each model consists of a power supply, a converter, and a mechanical probe or horn. The power supply/converter changes standard electrical power to high frequency mechanical energy, which is then applied to the horn, where it is further amplified for use (often with specialized accessories).

Cell disruption, homogenization, and emulsification as induced by teh Sonifier cell idsruptor is the resul tof cavitation, created by ultrasonic vibrations. The converter transmits vibration through the horn into the sample to be processed through this cavitation. The ultrasonic vibrations transmitted through the horn can also be applied directly or indirectly to samples, using a variety of specifically designed horns, tips, chambers, or cup horns.

Branson logo

Sonifier® S-250A analog ultrasonic processor includes many features to make the technician’s work easier.

  • 200 Watt (S-250A)
  • Auto tuning for optimum performance under varying conditions
  • Power output control to match power to the application
  • Continuous or timed (0-15 minutes) operation to free technician for other activities
  • Pulsed mode to minimize heat generation in thermally-sensitive samples
  • Broad process range from 1ml to over 300 ml per sample
  • Power output meter to monitor power and permit reproducibility
  • Compact design limits required counter space
  • Sloped front control panel for visibility and easy control access
  • Includes a high-efficiency converter which requires no internal cooling
  • Supplied with a standard 1/2″ titanium horn that is suitable for many applications
  • A wide range of dedicated accessories to meet special needs

Equipment

 Model Part Number Input Power Output Power Dimensions Weight
S-250A 101-063-196 117V, 60Hz 200 Watts 7-3/8″W X 16-3/4″ D X 8-3/4″H 19lbs
S-250A 101-063-197 220V,50/60Hz 200 Watts 7-3/8″W X 16-3/4″ D X 8-3/4″H 19lbs

 

Branson Sonifier

by | Jun 14, 2013 | Product News

Branson Sonifier

Cell disruption, homogenization, and emulsification as induced by the Sonifier cell disruptor is the result of cavitation, created by ultrasonic vibrations. The converter transmits vibration through the horn and into the sample to be processed through this cavitation. The ultrasonic vibrations transmited through the horn can also be applied directly or indirectly to samples, using a variety of specifically designed horns, tips, chambers, or cup horns.

Branson Sonifier digital products take advantage of benefits of digital technology. This is particularly useful where precise process control and parameter measurement is required. These 20 kHz units include automatic amplitude control, broad-band tuning, and enhanced features.

Each model consists of a power supply, a converter, and a probe. The converter changes standard electrical power to high frequency mechanical energy, which is then applied to the probe, where it is further amplifed for use with the sonifer.

Branson logo

Sonifier® S-250D digital ultrasonic processor includes the same features as the analong units, but also offers these additional operator benefits:

  • 200 Watt (S-250D)
  • Sample rane to 300mL
  • Autotune plus Memory (AT/M) – provides fully-automatic tuning and stores frequency at the end of each cycle
  • Multiple mode operation – continuous, pulsed, timed, and temperature end-point
  • Setup menu in five languages
  • Digital parameter setting with valid paramter range checking
  • Digital timer (9 hours, 59 minutes, 59 seconds)
  • Amplitude is adjustable from 10-100%
  • User I/O offers remote start/stop control and teh ability to view temperature, amplitude, and power values during experiments
  • Automatic end-of-cycle shutoff using limit parameters
  • Self diagnostics on start-up
  • Twenty user-programmed presets for convenience

 

 Model Part Number Input Power Output Power Dimensions Weight
S-250D 101-063-588 117V, 60Hz 200 Watts 7-3/8″W X 16-3/4″ D X 8-3/4″H 20lbs
S-250D 101-063-589 220V,50/60Hz 200 Watts 7-3/8″W X 16-3/4″ D X 8-3/4″H 20lbs

BRANSONIC Mechanical Ultrasonic Cleaning Baths

by | Jun 14, 2013 | Promotional Offers

BRANSONIC Mechanical Ultrasonic Cleaning Baths

Bransonic® Ultrasonic MH Cleaning Bath

Overview. With the Bransonic® MH Ultrasonic bath, you get the added benefit of heat coupled with the durability and performance of our flagship ultrasonic bath. It also features a temperature sensor and auto shut-off when the unit reaches 69°C/156.2°F. All Bransonic® baths can also be used for cell separation, sample preparation and degassing of liquids.

Features.

  • Heated Cleaning – up to 69°C/156.2°F
  • 60-minute Mechanical Timer (can be set to run continuously)
  • 40kHz Industrial Transducers
  • Tower Control Panel
  • Built-in Pour Drain (½ & ¾ gallon) or Side Mounted Drain

Note: Parts should not be allowed to reset on tank bottom, see accessories for options.

 

Bransonic® Ultrasonic M Cleaning Bath

Overview.The Bransonic® M Ultrasonic Cleaning Bath is the leading mechanical ultrasonic bath. It’s designed for performance, control, durability and reliability for a variety of applications. All Bransonic® baths can also be used for cell separation, sample preparation and degassing of liquids.

Features.

  • 40kHz Industrial Transducers
  • 60-minute Mechanical Timer (can be set to run continuously)
  • Tower Control Panel
  • Built-in Pour Drain (½ & ¾ gallon) or Side Mounted Drain

Note: Parts should not be allowed to reset on tank bottom, see accessories for options.

Model 1800 Specifications

Overall Size 10″l x 12″w x 11.5″d
Tank Size 6″l x 5.5″w x 4″d
Weight 7 lbs
Frequency 40 kHz

Model 2800 Specifications

Overall Size 13.5″l x 12″w x 11.5″d
Tank Size 9.5″l x 5.5″w x 4″d
Weight 9 lbs
Frequency 40 kHz

Model 3800 Specifications

Overall Size 16″l x 12″w x 14.5″d
Tank Size 11.5″l x 6″w x 6″d
Weight 12 lbs
Frequency 40 kHz

Model 5800 Specifications

Overall Size 16″l x 15.5″w x 14.5″d
Tank Size 11.5″l x 9.5″w x 6″d
Weight 14 lbs
Frequency 40 kHz

Model 8800 Specifications

Overall Size 24″l x 18″w x 14.5″d
Tank Size 19.5″l x 11.5″w x 6″d
Weight 26 lbs
Frequency 40 kHz